Front door interior panel introduce

The part names of the interior panel of the left front door, from top to bottom, are: left front door glass, left front mirror, left front glass sealing strip, those with decorative strips on the outside are called left front door decorative strip. The left front door is decomposed into left front door, mirror, glass, door lock, door glass controller, door glass elevator, mirror controller, left front door interior panel, handle, etc. The car is structurally divided into frame, outer panel, chassis, engine, interior, glass, tire, and is functionally divided into electrical system and driving system Driving system, oil and gas system, filtration system, control system, cooling system)

Installation method of front door interior panel/rear door interior panel

1、 Prepare tools and work vehicles or workbenches. 2. Open the car door to its maximum size for easier operation of the hinge support. Place a bracket at the lower edge of the car door to support the weight of the door and protect it. Unscrew the window glass. In this example, the disassembly of the car door will be mainly introduced. If the car door needs to be disassembled before disassembly, the outdoor rearview mirror should be removed. 3. Disconnect the wire connector between the car door and the vehicle body to separate the door wiring harness, If necessary, first remove the inner decorative parts on the pillar. 4. Remove the clamp at the bottom of the door stopper locking pin and extract the locking pin from the hole. 5. Hold the door and remove the connecting bolt of the door hinge support. After removing the door, place it vertically on a padded surface. If only the door needs to be removed for maintenance, it is recommended to complete the disassembly of the door by removing the hinge connecting bolt instead of the fixed bolt, This can reduce the adjustment work of the car door. 6. Check the sleeve of the car door chain, replace it if necessary, lubricate the hinge joint, place the car door back on the hinge support, and reinstall the bolts. 7. Connect the door limiter, install the stop lock pin and locking plate, and connect the electrical plug. 8. Close the car door, check if it is aligned, and if there is no problem, tighten the hinge fixing bolts. 9. Note that if the front door is disassembled and assembled, it is necessary to install the rearview mirror back

BAIC New Energy EC introduce

On January 18, 2017, BAIC New Energy EC180 was officially launched. The new car is positioned as a small crossover pure electric vehicle, with a price range of 55000-60000 yuan. The body size of the EC180 is 3675/1630/1518mm, and the wheelbase is 2360mm. In terms of appearance, the overall lines of the new car are soft and smooth. The central logo of the front of the car is wrapped in blue, and the halogen headlights are designed with high and low beam integration. The side of the car is equipped with a luggage rack and black wheel arches. The rear of the car is compact, complex and layered, with a full and solid shape The interior design of the EC180 is simple and clear, with a large number of straight lines dividing clear functional areas, equipped with a three spoke steering wheel and LCD instrument panel. The high-end models are equipped with an 8-inch touch screen, supporting navigation, Bluetooth, Baidu CarLife and other functions. In terms of power, the maximum power of the EC180's electric motor is 30kW, the maximum torque is 140Nm, and it is equipped with a brake energy recovery system. Its NEDC operating range (see attached picture, inquiry) is 156km, and the maximum range exceeds 200km, When the maximum speed exceeds 100km/h, charging can be completed within 7 hours in slow charging mode