The exterior decoration of the metal anti-collision crossbeam. The function of the rear bumper: 1. Safety protection function; 2. Relieve external impact forces; 3. The role of protecting pedestrians; 4. Decorative; 5. Improve the aerodynamic performance of the vehicle. The rear bumper is composed of an outer panel, cushioning material, and crossbeam, which have certain elasticity and good force absorption characteristics. It is a safety device that absorbs and mitigates external impact forces and protects the rear of the vehicle)
The method for replacing the rear bumper is as follows: 1. Remove the cover, clip, screw, and bolt of the rear bumper; 2. Pull the bumper in the wheel arch area; 3. Remove the bumper from the side and replace it with a bumper of the same model. The rear bumper is a crossbeam under the rear light
The BAIC EU series is a new energy vehicle under the BAIC Group, which adopts the design of the Senbao D50 and adds blue decorative strips to the front grille and tail emblem for decoration. The BAIC New Energy EU260 continues to use the design of the Senbao D50 in terms of appearance and adds blue decorative strips to the front grille and tail emblem for decoration. In addition, the tail height of the EU260 has been increased by 29mm and the exhaust pipe has been removed. In terms of power, The EU260 is equipped with an electric motor with a maximum power of 100kW, peak torque of 260Nm, and a maximum speed of 140km/h. Official data shows that the vehicle's range can exceed 260km, and can reach 350km under constant speed driving conditions
Copyright © 2021.Company name All rights reserved.