On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)
1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo
In terms of appearance, the headlights of the BYD G5 are composed of a combination of lensed light groups, and the grille adopts a multi chrome style. We can see that below the logo in the center of the grille, there is also a front view camera. In terms of the tail, the BYD G5 tail light group adopts a two-stage combination design, and the rear row adopts a double-sided single exit design. At the same time, the trunk opening is larger than that of the Chery. In addition, the BYD G5 is more boldly designed than the Chery, and the car adopts a curved multi spoke grille design LED daytime running lights, with a waistline extending backwards from the front door to the tail lights. In terms of body size, the BYD G5 is longer, wider, and 4700/1790/1480mm in length, width, and height, with a wheelbase of 2670mm. In terms of power, the BYD G5 is still equipped with a 1.5T engine, paired with a 6-speed manual or dual clutch transmission. According to previous reports, the BYD G5 will also introduce a dual-mode hybrid system
Copyright © 2021.Company name All rights reserved.