Front lower swing arm introduce

The function of the front wheel lower control arm is to support the vehicle body, fix and support the wheels. The front wheel lower control arm is usually made of steel material, and the use of this material's control arm is due to its high strength, elongation, excellent formability and flanging performance, good rust prevention performance, and effective buffering of vibration generated during car driving. The function of the car lower control arm is to cushion vibration during car driving, Among them, the shock absorber is used to cooperate with the swing arm and play a buffering role. 2. Material: The swing arm has a variety of materials, including aluminum alloy, cast iron, double-layer stamped parts, single-layer stamped parts, all of which have advantages and disadvantages. Stamped parts have better toughness, but their strength is not enough, and they are easy to break under impact. 3. Rust prevention: You can usually check whether the swing arm is rusted by yourself. The position of the swing arm is located in the component connecting the front tire and the center of the car, which is easy to check, If rust is found, it is necessary to promptly go to the 4S store for treatment to prevent accidents caused by breakage)

Steps to replace the car's lower control arm:

The steps to replace the car's lower swing arm: 1. Remove the screw of the welding part between the swing arm and the front axle. This screw can be removed together with a No. 18 socket and wrench, without any obstruction around it, making it easy to disassemble. Remove the fixing screw of the support rod, where there are two screws connected to the lower swing arm, just remove these two screws; 2. Remove the fixing screw of the steering knuckle. This screw is slightly harder than the first two. You can use a No. 16 wrench to match the No. 16 socket to remove the screw and screw. Remove the swing arm. After removing all screws, you can use a hammer to knock down the swing arm. Pay attention to safety when knocking on the door; 3. Install a new connecting screw between the rocker arm and the steering knuckle. The installation process is relatively simple, just reverse the disassembly process and tighten the screw according to the specified torque. When installing the screw, tap the rocker arm upwards until the fixing bolt can pass through smoothly. Install the support rod fixing screw. After connecting the rocker arm to the support rod, tighten the two screws. 4. Install the fixing screws of the welded parts. As long as the holes are aligned, the bolt can pass through smoothly, Tighten the nut installation. In summary, it is best to perform four-wheel alignment on the vehicle after replacing the swing arm to prevent it from going in the wrong direction

Fox Active introduce

Relying on Ford's strong SUV research and development capabilities and manufacturing heritage, inheriting the excellent handling genes of Focus, the new Focus Active SUV model of the Focus family - the urban cutting-edge SUV - has been launched brilliantly. With excellent handling, excellent passability, trendy appearance, and leading technology, it better meets the diversified driving needs of the emerging post-90s consumers, with a price range of 139800 yuan to 153800 yuan. The Focus SUV is equipped with a 1.5-liter EcoBoost that integrates more than 20 cutting-edge technologies ® The turbocharged dual injection engine, paired with an 8-speed automatic transmission, can achieve a maximum power of 128 kW and a peak torque of 243 Nm Equipped with a multi road condition management system, including 5 driving modes including standard, sporty, economical, anti slip, and rough road surfaces, it can better cope with complex road conditions such as snow, mud, and gravel. The body is made of 1500 megapascals ultra-high strength material, which not only ensures safety but also provides better anti torsion performance, making handling more agile The Focus SUV is equipped with the representative Ford Co Pilot360 ™ The Intelligent Driving Assistance System integrates more than 10 leading driving assistance technologies, achieving L2 level autonomous driving. It is also equipped with the SYNC Intelligent Driving Information Entertainment System, jointly developed by Ford and Baidu with a 12.3-inch horizontally leading central control screen, bringing a more intelligent and interconnected upgrade experience for Chinese consumers. Today, the all-new Focus Active was launched on FUN DAY Ford Brand Day! As an SUV launched under the Fox family, the all-new Fox Active relies on the Ford brand's research and development capabilities and manufacturing heritage, inheriting the Fox family's control genes, and creating an urban cutting-edge SUV that combines excellent handling, excellent passability, trendy appearance, and leading technology, meeting the diverse driving needs of post-90s consumers