Rear wheel fender introduce

The leaf plate includes: front leaf plate, front leaf plate lining, front leaf plate light, rear leaf plate light, radiator frame. The leaf plate refers to a type of cover on motor vehicles and non motor vehicles (a slightly protruding, semi-circular small piece above the wheel), and the cover, as the name suggests, is the shell that covers the outside of motor vehicles and non motor vehicles. It conforms to fluid mechanics and reduces the wind resistance coefficient, Make the car run more smoothly. The fender, also known as the fender, is located outside the body of the wheels. Its function is to reduce the drag coefficient of the fender air outlet according to fluid dynamics, making the car run more smoothly. According to the installation position, it is divided into front fender and rear fender. The front fender is installed above the front wheel, because the front wheel has steering function, it is necessary to ensure the maximum limit space when the front wheel rotates, Therefore, designers will use a "wheel runout chart" to verify the design dimensions of the fender based on the selected tire model size. The rear fender does not have the problem of wheel rotation collision, but due to aerodynamic considerations, the rear fender slightly arches outward. Secondly, the front fender can prevent sand, stones, and mud rolled up by the wheels from splashing onto the bottom of the car during driving, reducing damage and corrosion to the chassis, The materials used are required to have weather aging resistance and good formability. Currently, many car front fenders are made of plastic materials with a certain degree of elasticity, making them more cushioning and safer)

Installation method of rear fender/rear fender assembly

1. Start the car and turn all wheels to the right, then turn off the engine and remove the car key. Then open the engine hood and disconnect the negative pole of the battery. Use a Phillips screwdriver to remove the four screws on the front bumper. Use a 5mm hex wrench to remove the two screws on the side of the front bumper; 2. Use a Phillips screwdriver and a 7mm socket to remove the three screws under the right side of the front bumper fascia. Use a Phillips screwdriver and a 7mm socket to remove the three screws of the fender. Remove the splash guard; 3. Use a small ratchet wrench, extension rod, and 7mm socket to remove the screws at the bottom of the front bumper. Use a square screwdriver and 7mm socket to remove the screws connecting the fender and bumper. Use a large ratchet wrench and 10mm socket to remove the four bolts behind the front headlight; 4. Remove the plug of the front headlight assembly. Remove the front headlight assembly. Remove the screws connecting the splash guard to the fender, and the fender can be removed; 5. The fender is located outside the vehicle body of the wheels. Its function is to reduce the drag coefficient based on fluid dynamics, making the vehicle travel smoother. It is further divided into front fender and rear fender according to the installation position, with the front fender installed above the front wheel; 6. Due to the steering function of the front wheels, it is necessary to ensure the maximum limit space when the front wheels rotate. Therefore, the designer will use the "wheel runout diagram" based on the selected tire model size to verify the design size of the fender

Fox Active introduce

Relying on Ford's strong SUV research and development capabilities and manufacturing heritage, inheriting the excellent handling genes of Focus, the new Focus Active SUV model of the Focus family - the urban cutting-edge SUV - has been launched brilliantly. With excellent handling, excellent passability, trendy appearance, and leading technology, it better meets the diversified driving needs of the emerging post-90s consumers, with a price range of 139800 yuan to 153800 yuan. The Focus SUV is equipped with a 1.5-liter EcoBoost that integrates more than 20 cutting-edge technologies ® The turbocharged dual injection engine, paired with an 8-speed automatic transmission, can achieve a maximum power of 128 kW and a peak torque of 243 Nm Equipped with a multi road condition management system, including 5 driving modes including standard, sporty, economical, anti slip, and rough road surfaces, it can better cope with complex road conditions such as snow, mud, and gravel. The body is made of 1500 megapascals ultra-high strength material, which not only ensures safety but also provides better anti torsion performance, making handling more agile The Focus SUV is equipped with the representative Ford Co Pilot360 ™ The Intelligent Driving Assistance System integrates more than 10 leading driving assistance technologies, achieving L2 level autonomous driving. It is also equipped with the SYNC Intelligent Driving Information Entertainment System, jointly developed by Ford and Baidu with a 12.3-inch horizontally leading central control screen, bringing a more intelligent and interconnected upgrade experience for Chinese consumers. Today, the all-new Focus Active was launched on FUN DAY Ford Brand Day! As an SUV launched under the Fox family, the all-new Fox Active relies on the Ford brand's research and development capabilities and manufacturing heritage, inheriting the Fox family's control genes, and creating an urban cutting-edge SUV that combines excellent handling, excellent passability, trendy appearance, and leading technology, meeting the diverse driving needs of post-90s consumers