Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
The Ford Taurus was a 1986 Ford Taurus model, which was undoubtedly a sensational design for the mainstream family sedan market at the time. The streamlined design style that followed aerodynamic principles made most other sedans look very outdated, and other car manufacturers followed suit for a while. The Ford Taurus was once the best-selling sedan in the United States, and it was not the first car to use a streamlined design, Before its launch, the Audi 5000 had already used this design, so some jokingly referred to it as a combination of Audi's streamlined body and Ford's engine. However, regardless, the streamlined design style of cars we see today was popularized by the Ford Taurus
Copyright © 2021.Company name All rights reserved.