Reverse mirror assembly introduce

On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)

Installation method of reverse mirror assembly/rearview mirror assembly

1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo

Great Wall Fengjun 6 introduce

The Great Wall Fengjun 6 was officially launched on April 16, 2014. The Fengjun 6 has a length/width/height of 5345/1800/1760mm, a wheelbase of 3200mm, a cargo box length/width/height of 1545/1460/480mm, a maximum cargo capacity of 950 kilograms, a minimum ground clearance of 188mm, an approach angle of 27 degrees, and a departure angle of 19 degrees. It adopts front and rear disc brakes, and a suspension structure of front double wishbone torsion bar spring independent suspension/rear steel plate spring non independent suspension. The minimum turning diameter of the most hydraulic power assisted steering is 14.5 meters