The clutch three piece set refers to the clutch friction plate, clutch pressure plate, clutch release bearing. The clutch pressure plate is the most important component in the clutch assembly, which directly determines whether the clutch is installed trembling, heavy, and used for a long time. The quality of the clutch friction plate will determine the overall service life and shock absorption and noise reduction effect of the clutch. The clutch release bearing is an important part of the clutch release system, Its quality determines the separation efficiency of the clutch system and the wear rate of the pressure plate separation)
This advocates installation in car repair shops, as the installation method for each car is different: 1. Clutch pressure plate: it is a crucial structure on the clutch, and its function plays a crucial role in driving safety of the car; 2. The clutch is located in the flywheel housing between the engine and transmission. The clutch assembly is screwed onto the rear plane of the flywheel, and the output shaft of the clutch is the input shaft of the transmission. During the driving process of the car, the driver can press or release the clutch pedal as needed, temporarily separating the engine and transmission and gradually engaging them to cut off or transmit power input from the engine to the transmission; 3. The clutch is a common component in mechanical transmission that can be disengaged or engaged in the transmission system at any time. The general requirement is smooth engagement, rapid and thorough separation; Easy to adjust and maintain, with small external dimensions; Small weight, good wear resistance, and sufficient heat dissipation capacity; Convenient and labor-saving, commonly used methods include clamp type and friction type
Before June 2010, the newly appointed Deputy General Manager of FAW, Wang Fachang, who was in charge of sales, revealed on various occasions that the Besturn B30 would officially be taken off the production line in the second half of 2010, and the B90 project, which was positioned as a higher level, was also being orderly promoted. However, the project of this entry-level A-class car with the model code B30 for FAW Besturn has been postponed to 2011 within FAW sedans, which means that there will be no new cars launched by FAW Besturn in 2010, As for the reason why the B30 project has been postponed to next year, FAW sedan personnel did not disclose specifically
Copyright © 2021.Company name All rights reserved.