tail lamp introduce

Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)

Installation of rear tail lights, fog lights, and brake lights

1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit

Pentium B30 introduce

Before June 2010, the newly appointed Deputy General Manager of FAW, Wang Fachang, who was in charge of sales, revealed on various occasions that the Besturn B30 would officially be taken off the production line in the second half of 2010, and the B90 project, which was positioned as a higher level, was also being orderly promoted. However, the project of this entry-level A-class car with the model code B30 for FAW Besturn has been postponed to 2011 within FAW sedans, which means that there will be no new cars launched by FAW Besturn in 2010, As for the reason why the B30 project has been postponed to next year, FAW sedan personnel did not disclose specifically