tail lamp introduce

Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)

Installation of rear tail lights, fog lights, and brake lights

1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit

DS 4S introduce

The DS 4S is positioned as a compact car that can achieve success, not only relying on its appearance as a single shining point, but also putting in a lot of effort in other aspects, such as power, interior, and handling, which greatly meets personal requirements. The "2018 DS 4S 30 THP Luxury Model", which combines various advantages, has an official price of 229900 yuan. This model is generous in terms of configuration and lane assistance ESP stable system The GPS navigation system, heated rearview mirror function, and electric folding rearview mirror function are all standard equipment. Compared with competitors, the DS 4S has a much better cost performance ratio