Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

DS6 introduce

The DS6 is the first A-class luxury SUV of the DS brand, produced by Changan PSA Co., Ltd In terms of appearance, the new car adopts the design style of the Wild Rubis concept car, which was released at last year's Shanghai Auto Show. The front face of the whole car adopts the DS family style design, with a chrome plated grille and an inner mesh format design. The front headlight style is more sharp. According to previous reports, the car shares the PF2 platform with the DS 5 model, with a body size of 4553mm/1858mm/1610mm, a wheelbase of 2732mm, and is equipped with 21 inch wheels