Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
At this year's Chengdu Auto Show, the Dongfeng Peugeot 4008 PHEV made its debut. From the actual car, the Dongfeng Peugeot 4008 PHEV is basically the same as the gasoline version, with exquisite lion eye headlights and a recognizable overall style. The basic data of the model is 4510 × one thousand eight hundred and fifty × 1628mm, consistent with the fuel version model, with only adjustments made to details. The vehicle weight is 1881kg, which is 400kg heavier than the existing model, and the body weight has significantly increased
Copyright © 2021.Company name All rights reserved.