On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)
1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo
The Dongfeng Fengshen AX3 is equipped with a 1.5L naturally aspirated engine, with a maximum power of 85kW/6000rpm and a maximum torque of 145N · m/4200rpm. In terms of appearance, the front face of the Dongfeng Fengshen AX3 still adopts a family style design, with fashionable front headlights. The front of the car adopts an X-shaped design, which has more tension and a three-dimensional layout of the front bumper, presenting a stronger sense of heaviness. In terms of the rear end, the new car's tail lights use LED light sources, and the rear windshield area is not too large, But the left and right sides extend to the side of the car, creating a more unique effect
Copyright © 2021.Company name All rights reserved.