Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

Citroen C6 introduce

The Citroen C6 is Citroen's flagship model, representing Citroen's cutting-edge car manufacturing technology and brand design style The appearance of the Citroen C6 not only has a distinct Citroen style, but also constantly exudes an elegant and exquisite luxury temperament. At the front of the body, the sharp dual function xenon headlights and the slender engine hood are connected by a huge chrome plated double herringbone logo. The longer front overhang does not appear cumbersome at all. On the side of the body, a chrome plated line runs through the entire body, complementing the roof curve to further enhance the muscular body The rear of the C6 is very distinctive, looking completely round and heavy from the side. The trunk is actually partially covered by the roof, and the longitudinally curved headlights and sunken rear windshield are even more impressive