electron fan introduce

The working principle and function of a car electronic fan are: 1. The working principle is that the car electronic fan is controlled by a temperature controller. When the water temperature rises to the upper limit, the temperature controller connects the power supply, and the fan starts to work. When the water temperature drops to the lower limit, the temperature controller turns off the power supply, and the fan stops working; 2. Its function is to cool the engine block and gearbox, and provide heat dissipation for the air conditioning condenser. The method of replacing the electronic fan is: 1. Open the engine hood of the car and remove the intake pipe located above the fan; 2. Use professional tools to unscrew screws; 3. Unscrew all screws and remove the fan from the car; 4. Install the new fan correctly on the new fan bracket and tighten the four fixing screws; 5. Start the engine to test whether the fan can operate normally. After checking for accuracy, install the intake pipe in the correct position. The Helper Auto Parts Platform provides ordering services for original electronic fan parts for various vehicle models)

The installation method for the electronic fan inside a car is as follows:

The installation method for the electronic fan in the car is as follows: 1. First, remove the intake module from the engine compartment, and then unplug the water tank fan cable hidden behind the intake module; 2. Then lift the car and loosen the fixing screws of the water tank from under the engine to allow the water tank to sink; 3. Remove the radiator fan module from the bottom of the car and replace it with a new fan

C4 Sega introduce

On September 2, 2015, Dongfeng Citroen unveiled its mid size C4 Sega in Chengdu with the theme of "the highest level of efficiency and beauty" The C4 Sega is equipped with a dual T combination of 1.2THP.1.6THP, and the turbo will intervene at 1000 rpm. The driver can feel the power output of T power intervention by pressing the accelerator. At the same time, the vehicle is equipped with an STT engine start stop system to minimize fuel consumption, with a comprehensive fuel consumption of only 5.0 liters per 100 kilometers. The car's configuration has been upgraded again, and the entire series is equipped with a 7-inch color intelligent multimedia touch screen system as standard, as well as a one key start intelligent keyless entry system, And the Citroen Connect in car connectivity system integrates intelligent navigation, entertainment information, car security services, remote vehicle diagnosis, and in car communication. It also comes with mainstream configurations such as one click start and blind spot monitoring