The exterior decoration of the metal anti-collision crossbeam. The function of the rear bumper: 1. Safety protection function; 2. Relieve external impact forces; 3. The role of protecting pedestrians; 4. Decorative; 5. Improve the aerodynamic performance of the vehicle. The rear bumper is composed of an outer panel, cushioning material, and crossbeam, which have certain elasticity and good force absorption characteristics. It is a safety device that absorbs and mitigates external impact forces and protects the rear of the vehicle)
The method for replacing the rear bumper is as follows: 1. Remove the cover, clip, screw, and bolt of the rear bumper; 2. Pull the bumper in the wheel arch area; 3. Remove the bumper from the side and replace it with a bumper of the same model. The rear bumper is a crossbeam under the rear light
The Kia K3 PHEV has been launched at the Chengdu Auto Show, with two models priced at 166800 yuan and 175800 yuan respectively after subsidies. As a pure electric plug-in hybrid model with a range of up to 80 kilometers, the arrival of the Kia K3 PHEV not only expands Kia's new energy product line, but also brings considerable pressure to several competitors. As one of the few compact plug-in hybrid products in the domestic market, the Kia K3 PHEV is a joint venture, The car is not only equipped with a power battery pack with a capacity of 12.9kWh, which enables its pure electric range to reach 80km, but also is equipped with a Kappa 1.6 GDi engine with a thermal efficiency of up to 40%, which is integrated with a long endurance electric drive system, resulting in a comprehensive fuel consumption of as low as 1L/100km. This also means that when the K3 PHEV is in a full fuel and full charge state, the car's range can reach 1080 kilometers
Copyright © 2021.Company name All rights reserved.