1. The body control module assembly transmits commands: the speed control command triggers a signal, which comes from the vehicle controller. On the one hand, the body controller reflects the driver's intention, and on the other hand, from the perspective of safety and the operation status of the vehicle electrical system, evaluates whether the response to the driver is reasonable, Finally, execute or discount the execution. The driver's intention is expressed and transmitted to the vehicle controller through the accelerator and brake pedals. 2. Adjust the operating status of the equipment: The specific instructions given by the vehicle controller to the motor controller are related to the power system, including acceleration, deceleration, braking, parking. The response made by the motor controller is to change the power supply current, voltage, frequency and other parameters, Ensure that the operating status of the motor meets the needs of the controller. 3. Detection feedback: If different motors have different thermal characteristics, different start stop control schemes should be adopted when continuously driving the motor to avoid motor overheating. The vehicle controller should consider using mature technology and products, and minimize the occurrence of faults in design selection and system design. Choosing intelligent chips can monitor the status of electrical equipment and provide feedback to microcontrollers)
The function of the body control module is to achieve discrete control functions and control numerous electrical appliances, mainly controlling the electrical appliances of the car body, such as lamps, wipers, door locks, electric windows, skylights, etc. It is the switch signals of these appliances that are input to the BCM, which directly or through relays controls the corresponding electrical appliances to work. With the development of automobiles, the comfort of automobiles is also constantly improving, which makes the application of automobiles more and more, More powerful modules are needed to control it. The editor will introduce the body control module. Introduction to body control module: The functions of the body control module include: electric door and window control, central door lock control, remote anti-theft, lighting system control, electric rearview mirror heating control, instrument backlight adjustment, power distribution, etc
The Kia K3 PHEV has been launched at the Chengdu Auto Show, with two models priced at 166800 yuan and 175800 yuan respectively after subsidies. As a pure electric plug-in hybrid model with a range of up to 80 kilometers, the arrival of the Kia K3 PHEV not only expands Kia's new energy product line, but also brings considerable pressure to several competitors. As one of the few compact plug-in hybrid products in the domestic market, the Kia K3 PHEV is a joint venture, The car is not only equipped with a power battery pack with a capacity of 12.9kWh, which enables its pure electric range to reach 80km, but also is equipped with a Kappa 1.6 GDi engine with a thermal efficiency of up to 40%, which is integrated with a long endurance electric drive system, resulting in a comprehensive fuel consumption of as low as 1L/100km. This also means that when the K3 PHEV is in a full fuel and full charge state, the car's range can reach 1080 kilometers
Copyright © 2021.Company name All rights reserved.