The shifting structure of automobiles is divided into gear lever, cable, gear selection and shifting structure, shift fork and synchronizer. The function of the gear lever is to control the gear position, engage and disengage gears. The function of the cable is to pull the gear position and provide gear changes. The function of the gear selection and shifting structure is to distinguish between engaging gears or gear changes. The function of the shift fork and synchronizer is to combine and separate the gears of each gear position)
(1) Remove the battery ground wire and odometer flexible shaft (2). Remove the clutch cable from the clutch release fork drive arm (3) Remove the connecting bolts (4) between the upper part of the shifting mechanism assembly housing and the engine. Remove the middle bracket of the engine, remove the engine exhaust device (5), and remove the transmission shaft from the shifting mechanism assembly. (6) Remove the reverse light and fuel consumption indicator wiring harness connectors. Remove the front lower protective plate of the shifting mechanism assembly housing and remove the starter (7) Loosen the fixing screws between the shift lever connector and the inner gear lever. Press out the support rod from the ball head of the shift lever connector to separate the inner gear lever from the shift lever connector. Install the 2071 support plate on the xx jack and gently lift the transmission
The Kia K3 PHEV has been launched at the Chengdu Auto Show, with two models priced at 166800 yuan and 175800 yuan respectively after subsidies. As a pure electric plug-in hybrid model with a range of up to 80 kilometers, the arrival of the Kia K3 PHEV not only expands Kia's new energy product line, but also brings considerable pressure to several competitors. As one of the few compact plug-in hybrid products in the domestic market, the Kia K3 PHEV is a joint venture, The car is not only equipped with a power battery pack with a capacity of 12.9kWh, which enables its pure electric range to reach 80km, but also is equipped with a Kappa 1.6 GDi engine with a thermal efficiency of up to 40%, which is integrated with a long endurance electric drive system, resulting in a comprehensive fuel consumption of as low as 1L/100km. This also means that when the K3 PHEV is in a full fuel and full charge state, the car's range can reach 1080 kilometers
Copyright © 2021.Company name All rights reserved.