The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
The attention of the K5 new energy vehicle in the automotive market is actually quite low, and many people may not have heard of such a car. However, after actually driving it, I found it quite surprising. It is very quiet when driving at low speeds because it is driven by an electric motor. It is not afraid of disturbing people when returning to small areas at night, and when driving purely electric, it feels very "environmentally friendly" and has a little sense of achievement Another advantage lies in the ability to obtain new energy licenses. For those living in cities with traffic restrictions and license plates, perhaps K5 new energy is a more reliable and convenient choice than K5
Copyright © 2021.Company name All rights reserved.