tail lamp introduce

Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)

Installation of rear tail lights, fog lights, and brake lights

1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit

Kia K5 New Energy Hybrid Edition introduce

The attention of the K5 new energy vehicle in the automotive market is actually quite low, and many people may not have heard of such a car. However, after actually driving it, I found it quite surprising. It is very quiet when driving at low speeds because it is driven by an electric motor. It is not afraid of disturbing people when returning to small areas at night, and when driving purely electric, it feels very "environmentally friendly" and has a little sense of achievement Another advantage lies in the ability to obtain new energy licenses. For those living in cities with traffic restrictions and license plates, perhaps K5 new energy is a more reliable and convenient choice than K5