The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)
When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps
Guoliu Xiangling V Self loading and unloading Garbage Truck Model: CLW5030ZZZB6 Self loading and unloading Garbage Truck, Chassis Model: BJ1030V4JV5-01, Total Mass (Kg): 2995, Rated Load Capacity (Kg): 865, Curb Weight (Kg): 2000, Driver's Cabin Passengers (Person): 2, Boundary Dimensions (mm): 47754875 × one thousand seven hundred and thirty × 2320mm, 2 axles, fuel type: gasoline,
Copyright © 2021.Company name All rights reserved.