Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

Haima S5 Youth Edition young introduce

Haima S5young is a new car from Haima Motors. Its exterior inherits the design of Haima S5: the overall design language adopts the Tiger Shark style design, and the tiger roar style central chrome grille is also very domineering, with thick internal lines and logos; Equipped with a brand new headlight group, with LED daytime running lights inside; The side lines are smooth, and the D-pillar adopts a suspended roof design; The tail design is layered and equipped with a large-sized spoiler. It will be equipped with a 1.6L naturally aspirated engine: as a reference, the current Haima S5 is equipped with 1.6L and 1.5T engines, with maximum power of 90kW and 120kW, and maximum torque of 160Nm and 223Nm