electron fan introduce

The working principle and function of a car electronic fan are: 1. The working principle is that the car electronic fan is controlled by a temperature controller. When the water temperature rises to the upper limit, the temperature controller connects the power supply, and the fan starts to work. When the water temperature drops to the lower limit, the temperature controller turns off the power supply, and the fan stops working; 2. Its function is to cool the engine block and gearbox, and provide heat dissipation for the air conditioning condenser. The method of replacing the electronic fan is: 1. Open the engine hood of the car and remove the intake pipe located above the fan; 2. Use professional tools to unscrew screws; 3. Unscrew all screws and remove the fan from the car; 4. Install the new fan correctly on the new fan bracket and tighten the four fixing screws; 5. Start the engine to test whether the fan can operate normally. After checking for accuracy, install the intake pipe in the correct position. The Helper Auto Parts Platform provides ordering services for original electronic fan parts for various vehicle models)

The installation method for the electronic fan inside a car is as follows:

The installation method for the electronic fan in the car is as follows: 1. First, remove the intake module from the engine compartment, and then unplug the water tank fan cable hidden behind the intake module; 2. Then lift the car and loosen the fixing screws of the water tank from under the engine to allow the water tank to sink; 3. Remove the radiator fan module from the bottom of the car and replace it with a new fan

Haima S5 Youth Edition young introduce

Haima S5young is a new car from Haima Motors. Its exterior inherits the design of Haima S5: the overall design language adopts the Tiger Shark style design, and the tiger roar style central chrome grille is also very domineering, with thick internal lines and logos; Equipped with a brand new headlight group, with LED daytime running lights inside; The side lines are smooth, and the D-pillar adopts a suspended roof design; The tail design is layered and equipped with a large-sized spoiler. It will be equipped with a 1.6L naturally aspirated engine: as a reference, the current Haima S5 is equipped with 1.6L and 1.5T engines, with maximum power of 90kW and 120kW, and maximum torque of 160Nm and 223Nm