Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
Haima S5young is a new car from Haima Motors. Its exterior inherits the design of Haima S5: the overall design language adopts the Tiger Shark style design, and the tiger roar style central chrome grille is also very domineering, with thick internal lines and logos; Equipped with a brand new headlight group, with LED daytime running lights inside; The side lines are smooth, and the D-pillar adopts a suspended roof design; The tail design is layered and equipped with a large-sized spoiler. It will be equipped with a 1.6L naturally aspirated engine: as a reference, the current Haima S5 is equipped with 1.6L and 1.5T engines, with maximum power of 90kW and 120kW, and maximum torque of 160Nm and 223Nm
Copyright © 2021.Company name All rights reserved.