The exterior decoration of the metal anti-collision crossbeam. The function of the rear bumper: 1. Safety protection function; 2. Relieve external impact forces; 3. The role of protecting pedestrians; 4. Decorative; 5. Improve the aerodynamic performance of the vehicle. The rear bumper is composed of an outer panel, cushioning material, and crossbeam, which have certain elasticity and good force absorption characteristics. It is a safety device that absorbs and mitigates external impact forces and protects the rear of the vehicle)
The method for replacing the rear bumper is as follows: 1. Remove the cover, clip, screw, and bolt of the rear bumper; 2. Pull the bumper in the wheel arch area; 3. Remove the bumper from the side and replace it with a bumper of the same model. The rear bumper is a crossbeam under the rear light
The Haima Fumeilai E7 is equipped with a battery pack with a capacity of 54.7kWh, an energy density of about 143Wh/kg, a comprehensive driving range of about 355km, and a power consumption of 17kWh/100km per 100 kilometers E7 can support two charging methods: fast charging and slow charging. Fast charging can charge the battery 80% in half an hour and 100% in one hour. In slow charging, the battery can be fully charged for less than 9 hours
Copyright © 2021.Company name All rights reserved.