Reverse mirror assembly introduce

On the passenger side, it consists of a reverse mirror lens, a reverse mirror cover, a reverse mirror light (some models have side turn signals on the leaf panel), a reverse mirror bracket, and a motor, including all accessories of the reverse mirror, which can be directly installed)

Installation method of reverse mirror assembly/rearview mirror assembly

1. First, break open a small gap with your hand, insert a long screwdriver, and pry open all the buckles; 2. Then you can see three screws, unplug the power interface, remove the three screws, and finally take them off; 3. It is best to keep the lenses. When disassembling the lenses, you need to put four fingers in with a circle of buckles around it. Put your fingers in the buckle position and apply a little force to mix them outward until you hear a clicking sound; 4. Then install the new rearview mirror assembly in the opposite direction of the photo

BYD F3DM introduce

The BYD F3DM reaches the power output level of a 3.0L engine. In the initial stage, the instantaneous acceleration performance of the BYD DM dual-mode electric vehicle far exceeds the level that a 3.0L engine can achieve. It is reported that the pure electric range of the BYD DM dual-mode electric vehicle equipped with iron batteries reaches 100 kilometers. The iron batteries developed by the company also remain stable in extreme high and low temperatures and collision experiments, It reflects a high safety index. In addition to high capacity and good safety, the iron battery of this car greatly reduces material costs, further accelerating its commercialization pace The BYD F3DM is the latest model in the F3 series