The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)
When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps
The Jinbei T30 is a single row model launched by Huachen Xinyuan Automobile, a derivative product of the Xiaohaishi X30. Therefore, its front end maintains a design style similar to BMW's style. The front headlights have a sharp shape and adopt a double kidney shaped intake grille. The body size is square, with a length, width, and height of 4930/1720/1995mm and a wheelbase of 3050mm. The cargo compartment size is 2950/1670/370mm. In terms of configuration, It has basic features such as front fog lights, front electric windows, EPS electric power assistance, remote control key, and three-point seat belt. The tires are made of 175/70 R14 Delint tires with steel wheels. In terms of power, it is equipped with a 1.3L gasoline engine, with a maximum power of 86 horsepower (63 kW) and a maximum torque of 105 Nm, and is matched with a 5-speed manual transmission. The suspension structure adopts a front MacPherson style and a rear integral bridge style, The number of steel plate springs is 6
Copyright © 2021.Company name All rights reserved.