tail lamp introduce

Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)

Installation of rear tail lights, fog lights, and brake lights

1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit

BYD G3 introduce

The interior style of the BYD G3 is similar to that of the Toyota Corolla, equipped with a self-developed keyless system that actively opens and closes the doors, and starts the engine with just one click. The BYD G3 is the first product of BYD's new high-end car network A3 and also the first model in the G series. The launch of the G3 marks the beginning of BYD's move towards high-end. The front face of the G3 is similar to the Corolla, with diamond shaped lenses and dynamic headlights, and a large-sized two segment chrome plated grille, The edges on both sides are slightly raised, adding a touch of dominance to the elegant and flat design