The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
At the 2018 Guangzhou Auto Show, the Jianghuai iEVA60 was officially released and planned to be launched in the second quarter of 2019. The Jianghuai iEVA60 is an electric version of the Jianghuai A60, which will be launched in the second quarter of 2019. The new car is based on the predecessor of the Jianghuai A60. As the electric vehicle does not need to introduce air to burn fuel, the large mouth grille design of the fuel version has been abandoned and replaced with a closed grille, complemented by a large-sized fog light frame decorated with chrome strips, There is an overall emotional visual tension
Copyright © 2021.Company name All rights reserved.