Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
At the 2018 Guangzhou Auto Show, the Jianghuai iEVA60 was officially released and planned to be launched in the second quarter of 2019. The Jianghuai iEVA60 is an electric version of the Jianghuai A60, which will be launched in the second quarter of 2019. The new car is based on the predecessor of the Jianghuai A60. As the electric vehicle does not need to introduce air to burn fuel, the large mouth grille design of the fuel version has been abandoned and replaced with a closed grille, complemented by a large-sized fog light frame decorated with chrome strips, There is an overall emotional visual tension
Copyright © 2021.Company name All rights reserved.