front fender introduce

The function of the front wheel fender is to ensure that there is enough space for the front wheel, while the rear fender does not have the problem of wheel rotation and collision, so it is mainly curved. Compared with the front fender, it is easy to be damaged during driving. In order to prevent sand, stones or mud rolled up by the wheels from splashing onto the bottom of the car, the fender is mostly made of plastic material, making it more cushioning. The fender is located in the semi-circular position directly above the tire, Vanes, also known as fenders, are divided into front and rear fenders according to their installation positions. They refer to a type of cover on both motor and non motor vehicles. Vanes include: front fender, front fender lining, front fender lights, rear fender lights, radiator frame. The function of a fender is to reduce the drag coefficient through fluid dynamics, making driving smoother; 2. In the process of driving a car, avoid sand, stones, and mud that are rolled up by the wheels from splashing onto the bottom of the car compartment. The fender is configured above the wheels of the vehicle as the outer panel on the side of the vehicle, and is formed by resin. The fender is formed by resin from the outer panel part and the reinforcement part as a whole. Assist the automotive parts platform to provide ordering services for the original parts of the front fender of various vehicle models)

Front fender replacement tutorial:

Front fender replacement tutorial: 1. First, align the support points at the bottom of the car with a jack, then raise the car chassis and remove the tires; 2. Subsequently, remove the screws and buckles that fix the inner lining of the leaf panel and remove the damaged leaf panel. Of course, we also need to clean the mud and sand underneath the leaf panel; 3. Finally, follow the opposite steps of disassembling the blade to install the new blade, and you are done; 4. Secondly, we also need to identify the cause of the broken inner lining of the fender, otherwise it will be a situation of "treating the symptoms but not the root cause" after replacement. However, the most likely reason is due to the lower limit size (ensuring the maximum limit space for tire rotation and jumping) When the car is driving on bumpy roads due to being too small, it is easy for the tires to push against the fender lining and crack for a long time. However, it is not a problem. At this time, we only need to increase the lower arm limit to avoid a "hard collision" between the tire and the fender lining

BYD L3 introduce

From the perspective of BYD's product system, the F3 is gradually moving towards the low-end, the G3 is moving towards the mid-range, and the L3 will be the first bullet in BYD's mid to high end models. The positioning of this car will be close to or slightly higher than the currently available compact car G3. With BYD's consistent high cost-effectiveness, it is expected to compete in the higher end automotive market and potentially impact the current compact car market dominated by joint venture brands The L3 front face features a wide and thick dual horizontal bar intake grille that is simple and atmospheric; The overall shape of the front headlights adopts a tear eye design, while the smoked black design adds a sporty style to the entire vehicle. The engine hood also adopts the popular raised design, making the overall style very linear and powerful. It can be seen that the L3 has surpassed the past in appearance design, forming a distinct style. The tail lights are designed with popular LED lights, which exude a grand, fashionable, elegant temperament, and reliable safety and quality