engine computer introduce

The car engine computer is the core part of electronic controlled cars nowadays, and its functions can be simply put as two: 1. receiving signals from various sensors and calculating corresponding data; 2. Control the fuel injection, ignition, and idle intake of the car engine based on the calculated data to ensure the normal operation of the engine and minimize engine emission pollution. 3. If the engine computer board is damaged, the following situations may occur: 1. The engine malfunction light is on, but then catches fire and the vehicle shakes; 2. The car is difficult to start, with no ignition or fuel injection, and internal program disorder. There are many symptoms of the engine computer board being broken, with minor ones being the engine malfunction light coming on and then catching fire. The vehicle shakes, making it difficult to start. In severe cases, the vehicle may be unable to start, with no ignition or fuel injection, and internal program disorder)

Installation method for engine computer

1. Use a T20 screwdriver to disassemble the screen and a 10mm hexagonal socket to disassemble the brake light. 2. Use a plastic pry bar to disassemble the panel, pry the pry bar firmly to loosen it, and unscrew the four screws of the host using t20. 3. Use t20 to unscrew the four screws around the host and pull them out, connecting three wires to the back. 4. Use a 10mm socket to disassemble three reversing lights, and the power of the rear camera is also connected to the black negative wire and the white green positive wire of this light

BYD L3 introduce

From the perspective of BYD's product system, the F3 is gradually moving towards the low-end, the G3 is moving towards the mid-range, and the L3 will be the first bullet in BYD's mid to high end models. The positioning of this car will be close to or slightly higher than the currently available compact car G3. With BYD's consistent high cost-effectiveness, it is expected to compete in the higher end automotive market and potentially impact the current compact car market dominated by joint venture brands The L3 front face features a wide and thick dual horizontal bar intake grille that is simple and atmospheric; The overall shape of the front headlights adopts a tear eye design, while the smoked black design adds a sporty style to the entire vehicle. The engine hood also adopts the popular raised design, making the overall style very linear and powerful. It can be seen that the L3 has surpassed the past in appearance design, forming a distinct style. The tail lights are designed with popular LED lights, which exude a grand, fashionable, elegant temperament, and reliable safety and quality