Shift mechanism assembly introduce

The shifting structure of automobiles is divided into gear lever, cable, gear selection and shifting structure, shift fork and synchronizer. The function of the gear lever is to control the gear position, engage and disengage gears. The function of the cable is to pull the gear position and provide gear changes. The function of the gear selection and shifting structure is to distinguish between engaging gears or gear changes. The function of the shift fork and synchronizer is to combine and separate the gears of each gear position)

Installation of gear shifting mechanism assembly

(1) Remove the battery ground wire and odometer flexible shaft (2). Remove the clutch cable from the clutch release fork drive arm (3) Remove the connecting bolts (4) between the upper part of the shifting mechanism assembly housing and the engine. Remove the middle bracket of the engine, remove the engine exhaust device (5), and remove the transmission shaft from the shifting mechanism assembly. (6) Remove the reverse light and fuel consumption indicator wiring harness connectors. Remove the front lower protective plate of the shifting mechanism assembly housing and remove the starter (7) Loosen the fixing screws between the shift lever connector and the inner gear lever. Press out the support rod from the ball head of the shift lever connector to separate the inner gear lever from the shift lever connector. Install the 2071 support plate on the xx jack and gently lift the transmission

BYD L3 introduce

From the perspective of BYD's product system, the F3 is gradually moving towards the low-end, the G3 is moving towards the mid-range, and the L3 will be the first bullet in BYD's mid to high end models. The positioning of this car will be close to or slightly higher than the currently available compact car G3. With BYD's consistent high cost-effectiveness, it is expected to compete in the higher end automotive market and potentially impact the current compact car market dominated by joint venture brands The L3 front face features a wide and thick dual horizontal bar intake grille that is simple and atmospheric; The overall shape of the front headlights adopts a tear eye design, while the smoked black design adds a sporty style to the entire vehicle. The engine hood also adopts the popular raised design, making the overall style very linear and powerful. It can be seen that the L3 has surpassed the past in appearance design, forming a distinct style. The tail lights are designed with popular LED lights, which exude a grand, fashionable, elegant temperament, and reliable safety and quality