The clutch three piece set refers to the clutch friction plate, clutch pressure plate, clutch release bearing. The clutch pressure plate is the most important component in the clutch assembly, which directly determines whether the clutch is installed trembling, heavy, and used for a long time. The quality of the clutch friction plate will determine the overall service life and shock absorption and noise reduction effect of the clutch. The clutch release bearing is an important part of the clutch release system, Its quality determines the separation efficiency of the clutch system and the wear rate of the pressure plate separation)
This advocates installation in car repair shops, as the installation method for each car is different: 1. Clutch pressure plate: it is a crucial structure on the clutch, and its function plays a crucial role in driving safety of the car; 2. The clutch is located in the flywheel housing between the engine and transmission. The clutch assembly is screwed onto the rear plane of the flywheel, and the output shaft of the clutch is the input shaft of the transmission. During the driving process of the car, the driver can press or release the clutch pedal as needed, temporarily separating the engine and transmission and gradually engaging them to cut off or transmit power input from the engine to the transmission; 3. The clutch is a common component in mechanical transmission that can be disengaged or engaged in the transmission system at any time. The general requirement is smooth engagement, rapid and thorough separation; Easy to adjust and maintain, with small external dimensions; Small weight, good wear resistance, and sufficient heat dissipation capacity; Convenient and labor-saving, commonly used methods include clamp type and friction type
The Leopard CT7 is a new pickup truck for Leopard cars. The Leopard CT7 comes in two models: standard double row and large double row, with a standard double row body size of 5310 × one thousand eight hundred and thirty-five × 1800mm, with a wheelbase of 3105mm; The body size of the large double row model is 5585 × one thousand eight hundred and thirty-five × 1800mm, with a wheelbase of 3380mm. The new car has a rugged appearance and is mainly equipped with practical interior features. The vehicle is equipped with a 1.9T diesel engine, with a maximum power of 136 horsepower and a peak torque of 300 Nm, matched with a 5-speed manual transmission. The body structure is non load bearing, with two wheel drive and four-wheel drive modes. The new car was officially launched on January 12, 2017, equipped with a 1.9T diesel engine and comes in five models: dual row/large dual row, two wheel drive/four-wheel drive
Copyright © 2021.Company name All rights reserved.