Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

Cheetah CT7 introduce

The Leopard CT7 is a new pickup truck for Leopard cars. The Leopard CT7 comes in two models: standard double row and large double row, with a standard double row body size of 5310 × one thousand eight hundred and thirty-five × 1800mm, with a wheelbase of 3105mm; The body size of the large double row model is 5585 × one thousand eight hundred and thirty-five × 1800mm, with a wheelbase of 3380mm. The new car has a rugged appearance and is mainly equipped with practical interior features. The vehicle is equipped with a 1.9T diesel engine, with a maximum power of 136 horsepower and a peak torque of 300 Nm, matched with a 5-speed manual transmission. The body structure is non load bearing, with two wheel drive and four-wheel drive modes. The new car was officially launched on January 12, 2017, equipped with a 1.9T diesel engine and comes in five models: dual row/large dual row, two wheel drive/four-wheel drive