The most headache inducing issue in repairing high-end cars is the computer. When repair personnel encounter a computer malfunction, they dare not conclude that it is a problem with the computer. 1. The main function of the engine ECU is to adjust the engine's operation through the execution structure. In terms of use, it is a specialized microcomputer controller for cars, which controls many components on the car ECU stands for Electronic Control Unit ECU can be said to be the brain of the engine. Without it, the engine cannot operate normally. ECU's main function is to adjust the engine's operation through the execution structure. 2. There are many sensors near the engine of a car, and their function is to transmit data back to ECU. After processing by ECU, corresponding mechanisms can be executed to adjust the engine's normal operation. ECU is generally located in the engine compartment, so it can be said that there is no ECU, The engine cannot be used. If there is damage to the sensors near the engine, it can also affect the operation of the engine. 3. The sensors around the engine include the air influenza sensor, intake temperature sensor, etc. It can be said that basically all the sensors of the vehicle are gathered here. If the sensors are damaged, the ECU cannot collect important information about the car, and cannot accurately adjust the engine operation)
The engine wiring harness is generally composed of multiple strands of copper flexible wires inside and wrapped in plastic on the outside. The engine is like a person's heart, and the wiring harness can be called a person's veins. If the veins are not smooth, it can damage health and even cause diseases. Similarly, poor wiring will affect the engine's performance. Regular wiring harness maintenance: Wiring harness maintenance usually uses wiring harness protective agents, which work by forming a protective film on the surface of the engine wire/battery joint, Isolate moisture and avoid oxidation. Due to the high pressure resistance and insulation characteristics of the spray, it can also delay the aging and cracking of rubber and plastic fittings in the cabin, prevent electrical leakage caused by aging of the wiring harness. In addition, the protective film sprayed is not easy to get dirty and easy to wipe, which can keep the cabin clean for a long time
The Leopard CT7 is a new pickup truck for Leopard cars. The Leopard CT7 comes in two models: standard double row and large double row, with a standard double row body size of 5310 × one thousand eight hundred and thirty-five × 1800mm, with a wheelbase of 3105mm; The body size of the large double row model is 5585 × one thousand eight hundred and thirty-five × 1800mm, with a wheelbase of 3380mm. The new car has a rugged appearance and is mainly equipped with practical interior features. The vehicle is equipped with a 1.9T diesel engine, with a maximum power of 136 horsepower and a peak torque of 300 Nm, matched with a 5-speed manual transmission. The body structure is non load bearing, with two wheel drive and four-wheel drive modes. The new car was officially launched on January 12, 2017, equipped with a 1.9T diesel engine and comes in five models: dual row/large dual row, two wheel drive/four-wheel drive
Copyright © 2021.Company name All rights reserved.