What is a three-way catalytic converter? A three-way catalytic converter is the most important external purification device installed in a car's exhaust system, which can remove CO from the car's exhaust Harmful gases such as HC and NOx are converted into harmless carbon dioxide, water, and nitrogen through oxidation and reduction reactions. Simply put, they purify the exhaust gas. The working principle of a three-way catalytic converter is as follows: 1. When the engine exhaust gas is discharged through the exhaust pipe, due to the catalytic effect of the purifying agent in the three-way catalytic converter, the activity of C0, HC, and NOx is enhanced, leading to oxidation and reduction reactions. 2. C0 is oxidized to colorless and non-toxic C02 at high temperatures, HC compounds are oxidized to H20 and C02 at high temperatures, while NOx is reduced to N2 (nitrogen) and 02 (oxygen), thereby purifying the engine's exhaust emissions)
Method for installing a three-way catalytic converter: ① Use 8 bolts to install 2 heat shields on the new preheated three-way catalytic converter. ② Install the new gasket, protective ring, and sealing gasket onto the preheated three-way catalytic converter. ③ Use 3 bolts and 2 new nuts to install the preheated three-way catalytic converter with a tightening torque of 29N. m. ④ Use bolts and nuts to install the exhaust manifold bracket with a tightening torque of 42N. m. ⑤ Use bolts and nuts to install the No.1 exhaust manifold bracket with a tightening torque of 42N. m. ⑥ Connect the secondary oxygen sensor connector
MG MG HS plug-in hybrid is a new energy vehicle under MG MG, featuring the "Copenhagen Blue" new energy color scheme and Porsche's 360 ° pure surface design, meeting REACH requirements The strict European standards such as E-MARK, equipped with SAIC Group's leading "three electric" technology, have set a new benchmark for quality in travel and driving, making it a globally high-quality new energy vehicle. The MG HS plug-in hybrid continues the design concept of the fuel version of the MG HS, retaining the same 360 ° pure surface design as Porsche. The star power field intake grille, full LED headlights and other elements are equipped with unique exclusive logos at the rear. The new car has a length, width, and height of 4574mm * 1876mm * 1685mm, respectively, Wheelbase is 2720mm
Copyright © 2021.Company name All rights reserved.