The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
MG MG HS plug-in hybrid is a new energy vehicle under MG MG, featuring the "Copenhagen Blue" new energy color scheme and Porsche's 360 ° pure surface design, meeting REACH requirements The strict European standards such as E-MARK, equipped with SAIC Group's leading "three electric" technology, have set a new benchmark for quality in travel and driving, making it a globally high-quality new energy vehicle. The MG HS plug-in hybrid continues the design concept of the fuel version of the MG HS, retaining the same 360 ° pure surface design as Porsche. The star power field intake grille, full LED headlights and other elements are equipped with unique exclusive logos at the rear. The new car has a length, width, and height of 4574mm * 1876mm * 1685mm, respectively, Wheelbase is 2720mm
Copyright © 2021.Company name All rights reserved.