Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
MG MG HS plug-in hybrid is a new energy vehicle under MG MG, featuring the "Copenhagen Blue" new energy color scheme and Porsche's 360 ° pure surface design, meeting REACH requirements The strict European standards such as E-MARK, equipped with SAIC Group's leading "three electric" technology, have set a new benchmark for quality in travel and driving, making it a globally high-quality new energy vehicle. The MG HS plug-in hybrid continues the design concept of the fuel version of the MG HS, retaining the same 360 ° pure surface design as Porsche. The star power field intake grille, full LED headlights and other elements are equipped with unique exclusive logos at the rear. The new car has a length, width, and height of 4574mm * 1876mm * 1685mm, respectively, Wheelbase is 2720mm
Copyright © 2021.Company name All rights reserved.