The shifting structure of automobiles is divided into gear lever, cable, gear selection and shifting structure, shift fork and synchronizer. The function of the gear lever is to control the gear position, engage and disengage gears. The function of the cable is to pull the gear position and provide gear changes. The function of the gear selection and shifting structure is to distinguish between engaging gears or gear changes. The function of the shift fork and synchronizer is to combine and separate the gears of each gear position)
(1) Remove the battery ground wire and odometer flexible shaft (2). Remove the clutch cable from the clutch release fork drive arm (3) Remove the connecting bolts (4) between the upper part of the shifting mechanism assembly housing and the engine. Remove the middle bracket of the engine, remove the engine exhaust device (5), and remove the transmission shaft from the shifting mechanism assembly. (6) Remove the reverse light and fuel consumption indicator wiring harness connectors. Remove the front lower protective plate of the shifting mechanism assembly housing and remove the starter (7) Loosen the fixing screws between the shift lever connector and the inner gear lever. Press out the support rod from the ball head of the shift lever connector to separate the inner gear lever from the shift lever connector. Install the 2071 support plate on the xx jack and gently lift the transmission
MG MG HS plug-in hybrid is a new energy vehicle under MG MG, featuring the "Copenhagen Blue" new energy color scheme and Porsche's 360 ° pure surface design, meeting REACH requirements The strict European standards such as E-MARK, equipped with SAIC Group's leading "three electric" technology, have set a new benchmark for quality in travel and driving, making it a globally high-quality new energy vehicle. The MG HS plug-in hybrid continues the design concept of the fuel version of the MG HS, retaining the same 360 ° pure surface design as Porsche. The star power field intake grille, full LED headlights and other elements are equipped with unique exclusive logos at the rear. The new car has a length, width, and height of 4574mm * 1876mm * 1685mm, respectively, Wheelbase is 2720mm
Copyright © 2021.Company name All rights reserved.