The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)
1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear
As the second model of the Lynk&Co brand, the Lynk&Co 02 is positioned as a high-energy coupe SUV, built on the CMA basic module architecture. It was first launched in Amsterdam, Netherlands on March 26, 2018; On June 28, 2018, Lynk&Co officially launched its Spring/Summer launch event. Lynk&Co 02 launched a total of eight models in three series: "pure, dazzling, and powerful", equipped with the Drive-E series 2.0TD and 1.5TD engines, paired with a power combination of a 7DCT transmission and a 6-speed manual transmission. The official guide price is 122800 to 192800 yuan
Copyright © 2021.Company name All rights reserved.