Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)
1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit
Lynk&Co's new compact SUV, 05, will be officially launched in March 2020. The new car is based on the CMA architecture and adopts the family style urban opposition aesthetic design concept, presenting a harmonious visual beauty. The size of the new car is 4592 * 1879 * 1628mm, with a wheelbase of 2734mm, the same as 01. The most obvious feature of the new car is the coupe style design on the side, and the shark gill decoration and extended lines on the side are also very similar to 01
Copyright © 2021.Company name All rights reserved.