The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)
When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps
The 406 is a new model launched by Peugeot in 1999, continuing the 405 model in 1997. The 406 has two power units, with 2.0-liter and 3.0-liter engines available for buyers to choose from. The 2.0-liter engine is the same as the 406 RV model, but the other one is a V-shaped six cylinder engine. The maximum displacement is 2946cc, and the main body and upper cover of the engine cylinder are made of light aluminum alloy material. The intake adopts a variable intake manifold design, with a maximum horsepower of 194hp/5500rpm
Copyright © 2021.Company name All rights reserved.