tail lamp introduce

Front and rear position lights, commonly known as small lights or width indicator lights, are mainly used to indicate the presence and overall width of a car, making it easier for other vehicles to judge when passing or overtaking. Brake signal lights, commonly known as brake lights, are warning lights used to remind vehicles behind that the car has taken braking measures. They are installed at the rear of the car, red, and when the car brakes, the line is connected, Automatically emitting red light. Due to the significant importance of brake lights to car safety, their brightness is significantly higher than that of rear position lights, generally more than five times the brightness of rear position lights. It can be seen clearly from a distance of more than 100m during the day. Non standard terminology: brake lights)

Installation of rear tail lights, fog lights, and brake lights

1. Open the trunk and use a Phillips screwdriver or socket to remove the bolts. Pull the lamp assembly out of the rear pillar. 2. Rotate the socket counterclockwise and remove it, remove the old bulb, and insert the new bulb. 3. Slide the lamp assembly into the guide groove on the body. 4. Align the pins with the body washers, and then push them in until they fully fit

Peugeot 406 Coupe introduce

The 406 is a new model launched by Peugeot in 1999, continuing the 405 model in 1997. The 406 has two power units, with 2.0-liter and 3.0-liter engines available for buyers to choose from. The 2.0-liter engine is the same as the 406 RV model, but the other one is a V-shaped six cylinder engine. The maximum displacement is 2946cc, and the main body and upper cover of the engine cylinder are made of light aluminum alloy material. The intake adopts a variable intake manifold design, with a maximum horsepower of 194hp/5500rpm