electron fan introduce

The working principle and function of a car electronic fan are: 1. The working principle is that the car electronic fan is controlled by a temperature controller. When the water temperature rises to the upper limit, the temperature controller connects the power supply, and the fan starts to work. When the water temperature drops to the lower limit, the temperature controller turns off the power supply, and the fan stops working; 2. Its function is to cool the engine block and gearbox, and provide heat dissipation for the air conditioning condenser. The method of replacing the electronic fan is: 1. Open the engine hood of the car and remove the intake pipe located above the fan; 2. Use professional tools to unscrew screws; 3. Unscrew all screws and remove the fan from the car; 4. Install the new fan correctly on the new fan bracket and tighten the four fixing screws; 5. Start the engine to test whether the fan can operate normally. After checking for accuracy, install the intake pipe in the correct position. The Helper Auto Parts Platform provides ordering services for original electronic fan parts for various vehicle models)

The installation method for the electronic fan inside a car is as follows:

The installation method for the electronic fan in the car is as follows: 1. First, remove the intake module from the engine compartment, and then unplug the water tank fan cable hidden behind the intake module; 2. Then lift the car and loosen the fixing screws of the water tank from under the engine to allow the water tank to sink; 3. Remove the radiator fan module from the bottom of the car and replace it with a new fan

Isuzu D-MAX introduce

The domestically produced Isuzu D-MAX pickup truck was officially launched on December 7th. The new car will be equipped with a 2.5T diesel engine and offer optional four-wheel drive models. A total of six models have been launched. The length, width, and height of the domestically produced Isuzu D-MAX are 5295mm/1860mm/1795mm, respectively, and the wheelbase has been extended to 3095mm, which is quite impressive. The double row seat design is very suitable for domestic users, and the standard 5-seat design can meet daily use needs. The domestically produced Isuzu D-MAX adopts a 5-seat design, The high-end models are also equipped with leather seats and electric adjustment functions, and the comfort configuration is not poor. The biggest highlight is still the rear seats, and legroom is usually the soft rib of a pickup truck. However, the D-MAX's rear seats are very spacious, and the backrest angle also has a certain tilt. The Isuzu D-MAX offers two body height models, and the four-wheel drive version has a minimum ground clearance of 205mm. In terms of power, the overseas version of the D-MAX has two versions of diesel engines, 2.5T and 3.0T, But the domestically introduced D-MAX will only be equipped with one 2.5T diesel engine, with a maximum power of 100kW (136PS) and a maximum torque of 320Nm