Differential assembly of transfer case introduce

The so-called transfer case of a car can be understood literally: its main purpose is to distribute the power of the engine and output it to the front and rear axles. Therefore, the transfer case is actually a standard accessory in four-wheel drive models. According to the different forms of four-wheel drive, there are generally several types of transfer cases: traditional part-time four-wheel drive transfer case, full-time four-wheel drive transfer case, timely four-wheel drive transfer case, and optional four-wheel drive transfer case)

Installation method for differential assembly of transfer case

1. First, clean all components. 2. Assemble the differential, install the driven hyperbolic gear, install the driven gear bearing cover, and adjust the preload of the driven gear bearing. 3. Install the driving hyperbolic gear and oil seal seat on the bevel gear bearing seat and adjust the preload of the driving gear bearing through the gasket. 4. Install the driving hyperbolic gear and adjust the meshing clearance and imprint of the main and driven bevel gears by adjusting the gasket between the driving bevel gear bearing seat and the main reducer housing and rotating the nuts on both sides of the driven bevel gear

Modern Lawrence COUPE introduce

Recently, Hyundai Motor (China) Investment Co., Ltd. (referred to as Hyundai Motor) filed a recall plan with the General Administration of Quality Supervision, Inspection and Quarantine in accordance with the requirements of the Regulations on the Recall Management of Defective Automotive Products. Hyundai Motor has decided to recall imported Rolls Royce Coolpad cars equipped with manual transmissions produced between March 23, 2012 and April 6, 2015, starting from January 1, 2016