Front hood (front hood) introduce

The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)

The installation method of the engine hood in a car needs to be adjusted according to its position

When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps

Lifan 650 introduce

The Lifan 650EV made its debut at the Beijing Auto Show and was officially launched at the Chongqing Auto Show on June 6th. The new car has two models, with an official guide price of 168900 to 175800 yuan and a subsidized price of 79900 to 86800 yuan. As the first new energy vehicle launched by Lifan Motors for the C-end market, the Lifan 650EV is positioned as a pure electric compact sedan. The comprehensive range of the Lifan 650EV exceeds 300km. In terms of appearance, the Lifan 650EV's headlights are designed with crystal edges, and the waistline extending from the front hood to the rear is designed with straight lines, perpendicular to the B-pillar. Split, multiple dual color aluminum alloy impact resistant wheels. The Lifan 650EV has dimensions of 4625/1715/1510mm in length, width, and height, and a wheelbase of 2610mm