Shift mechanism assembly introduce

The shifting structure of automobiles is divided into gear lever, cable, gear selection and shifting structure, shift fork and synchronizer. The function of the gear lever is to control the gear position, engage and disengage gears. The function of the cable is to pull the gear position and provide gear changes. The function of the gear selection and shifting structure is to distinguish between engaging gears or gear changes. The function of the shift fork and synchronizer is to combine and separate the gears of each gear position)

Installation of gear shifting mechanism assembly

(1) Remove the battery ground wire and odometer flexible shaft (2). Remove the clutch cable from the clutch release fork drive arm (3) Remove the connecting bolts (4) between the upper part of the shifting mechanism assembly housing and the engine. Remove the middle bracket of the engine, remove the engine exhaust device (5), and remove the transmission shaft from the shifting mechanism assembly. (6) Remove the reverse light and fuel consumption indicator wiring harness connectors. Remove the front lower protective plate of the shifting mechanism assembly housing and remove the starter (7) Loosen the fixing screws between the shift lever connector and the inner gear lever. Press out the support rod from the ball head of the shift lever connector to separate the inner gear lever from the shift lever connector. Install the 2071 support plate on the xx jack and gently lift the transmission

Lifan 650 introduce

The Lifan 650EV made its debut at the Beijing Auto Show and was officially launched at the Chongqing Auto Show on June 6th. The new car has two models, with an official guide price of 168900 to 175800 yuan and a subsidized price of 79900 to 86800 yuan. As the first new energy vehicle launched by Lifan Motors for the C-end market, the Lifan 650EV is positioned as a pure electric compact sedan. The comprehensive range of the Lifan 650EV exceeds 300km. In terms of appearance, the Lifan 650EV's headlights are designed with crystal edges, and the waistline extending from the front hood to the rear is designed with straight lines, perpendicular to the B-pillar. Split, multiple dual color aluminum alloy impact resistant wheels. The Lifan 650EV has dimensions of 4625/1715/1510mm in length, width, and height, and a wheelbase of 2610mm