The deformation of the engine hood needs to be repaired through sheet metal. Go to a regular repair shop and the technician will help you handle it. If it is a serious impact deformation, it is recommended to replace it. Even after repairing the surface, the lower reinforcement plate will not be completely repaired, resulting in a significant decrease in the strength of the engine hood, which is not conducive to safe driving; Opening method: There is a cable under the steering wheel, and the handle is pulled open to unlock. Then, both hands lift the engine hood and it will be lifted to a certain height in the middle. Put your fingers in and there is a card that can be pushed in and pushed in to fully open the engine hood. If it is a hydraulic rod, simply pull the handle to open the engine hood)
When installing the engine hood on a car, it is necessary to adjust the position. If the installation position of the engine hood is not appropriate, adjustments can be made as follows: ① Unscrew the fixing bolts of the engine hood hinge, move the hinge up and down, left and right to adjust the engine hood. ② Rotate the engine hood buffer block to adjust the height of the engine hood so that it is flush with the front and side edges of the body. ③ After unscrewing the fixing bolts of the engine hood latch, move the latch up and down, left and right to adjust. ④ Close the engine hood and check for alignment with surrounding components, with even gaps
The Dongfeng Xiaokang K07S is superior to its peers in terms of space, power, and load-bearing capacity, making it one of the best new economy micro passenger models. In terms of appearance, the Dongfeng Xiaokang K07S adopts a brand new family style design, with two simple front air grilles and round and full front headlights complementing each other, making it more approachable and recognizable. Its door design adopts a combination of driver and passenger double doors and side sliding doors, It also facilitates passengers to board the car from the middle row, and to some extent improves its aesthetics. The Dongfeng Xiaokang K07S is also the most spacious model in its class, with body dimensions of 4070mm in length, width, and height, respectively × 1560mm × 1910mm, with clever spatial layout, its maximum cargo capacity can reach 4.14m ³, In addition, the rear seats are detachable, allowing for flexible use for carrying passengers and cargo, making it highly practical
Copyright © 2021.Company name All rights reserved.