Front wheel horn introduce

The sheep horn of a car is called a "steering knuckle" or "steering knuckle arm", which is the axle head at both ends of the front I-beam that bears the steering function. It is somewhat like a sheep horn, so it is commonly known as a "sheep horn". The steering knuckle, also known as a "sheep horn", is one of the important parts in the steering axle of a car, which can make the car stable and sensitively transmit the direction of travel. The function of the steering knuckle is to transmit and bear the front load of the car, Support and drive the front wheels to rotate around the main pin, causing the car to turn. In the driving state of the car, it bears variable impact loads, so it is required to have high strength. The front axle is equipped with a front axle head on the axle and a steering arm on the seat, just like a sheep horn, so it is called a sheep horn. Generally, it is connected to the front axle by the Liren axle, which is often the case on trucks, Nowadays, cars are all equipped with independent suspensions. Hello, the sheep horn of a car is also known as the steering knuckle assembly. The steering knuckle is one of the main components on the steering axle of a car, which can ensure stable driving and sensitively transmit the direction of travel. The function of the steering knuckle is to bear the load on the front of the car, support and drive the front wheels to rotate around the main pin, and make the car turn. In the driving state of the car, it bears variable impact loads. Therefore, Require it to have high strength. Kingpin inclination angle and front wheel camber angle)

Installation steps for front wheel horn/steering knuckle/steering knuckle arm

If the car horn needs to be replaced, it is recommended to go to a repair shop for replacement. Generally, it cannot be replaced by oneself, which is quite complex. The function of the car horn is as follows: 1. The role of the car horn is to transmit and bear the front load of the car, support and drive the front wheels to rotate around the main pin, and make the car turn. In the driving state of the car, it bears a variable impact load, so it requires high strength; 2. The sheep horn of a car is called the "steering knuckle" or "steering knuckle arm", which is the axle head at both ends of the front I-beam that bears the steering function. It is somewhat like a sheep horn, so it is commonly known as a "sheep horn"; 3. The steering knuckle, also known as the "steering knuckle", is one of the important components of a car's steering, which can make the car run smoothly, stably, and sensitively transmit the direction of travel. Generally, replacing the steering knuckle requires going to a 4S store. The steering knuckle of a car is called the "steering knuckle" or "steering knuckle arm", which is located on both sides of the front I-beam and bears the steering function of the axle head. It is somewhat like a sheep horn, So it is commonly known as "sheep horn". It is recommended to consult the sales personnel or after-sales technicians of 4S dealerships. If the sheep horn is replaced, the wheels need to be disassembled. If the brake cylinder is replaced, the wheels, brake cylinder, steering rod, support arm, and wheel bearings need to be disassembled. After replacement, four-wheel alignment should be done

Dongfeng Xiaokang C31 introduce

The Dongfeng Xiaokang C31 is a practical micro truck model that combines strong load-bearing capacity and excellent power. "Big Power, Big Load" is also the promotional slogan tailored by Dongfeng Xiaokang. In terms of appearance, the Dongfeng Xiaokang C31 has strong originality, with a rounded front face design and two chrome plated front air grilles that perfectly match the headlights, full of affinity; In terms of body size, the Dongfeng Xiaokang C31 has obvious advantages compared to competing models, with an external length, width, and height of 4730mm, 1655mm, and 1960mm respectively, and a wheelbase of 3050mm. In addition, the C31 eliminates the second row seat space, and its cargo box length, width, and height can reach 2900mm, 1540mm, and 370mm. The ultra long cargo box size can also meet the demand for loading more and longer items; In terms of power, the Dongfeng Xiaokang C31 is equipped with two types of engines: the "DK12-05" 1.2-liter naturally aspirated engine and the "DK15-06" 1.5-liter naturally aspirated engine. The 1.5-liter engine has a maximum power of 86 kW and a maximum torque of 147.5 Nm. When paired with a 5-speed manual transmission, the comprehensive fuel consumption per 100 kilometers is only 7.5L. Its excellent fuel efficiency and strong power performance also highlight the practicality advantages of the Xiaokang C31